Printers
From HelpDeskWiki
Note that many devices share the same or nearly the some codes, and they are thus grouped together.
Receipt printer commands for cash drawers and display poles
- Ithaca 1
- 27,43
- Ithaca 2
- "&%DF"
- Ithaca 50 (RecTrac! pre-set)
- 7
- Ithaca 80 (RecTrac! pre-set)
- 27,112,48,5,5
- Ithaca 80Plus
- 27,112,48,64,64 (actually used w/RecTrac!)
- Epson
- 27,112,0,100,250
- Samsung
- 27,112,1,20
- Smart drawer (RecTrac! pre-set)
- 13,13,24
- Star
- 27,7,0,100,28
- Star (RecTrac! pre-set)
- 28
Pole init (RecTrac! pre-set)
- 31,17
Pole Home (RecTrac! pre-set)
- 16,20
Receipt printer auto-cut
- Ithaca 80 (RecTrac! pre-set)
- 25
- Star 400 (RecTrac! pre-set)
- 27,100,48
From http://www.pointofsale.com/support.htm
Epson and Samsung control codes: Cash drawer trigger: 27,112,0,48 Partial cut (option): 27,105
Epson alternate cash drawer trigger: 27,112,0,64,240 (generates longer pulse)
Star control codes: Cash drawer trigger: 7 Partial cut (option): 27,100,48 or 27,100,49
Citizen control codes: Cash drawer trigger: 7 Partial cut (option): 27,80,00 or 27,80,01
Ithaca POSjet control codes: Cash drawer trigger: 27,120,1 Auto-cut (option): 27,118 Run Macro, for printing logos <27><31><114>macro name<0> (Use only with POSjet driver)
Most receipt printers will not work with the ECP setting; use EPP or standard instead. Many computers, especially Dells, are preset to ECP mode.
Pole Display Control Codes (For use with POSitive Software products)
Emax Universal AN-104 (Ultimate mode): Logic Controls PD3000: Line 1: 31,20 Line 2: 10,13 Characters per line: 18
Partner Tech CD5220: Line 1: 12,27,91,72 Line 2: 27,91,75,13 Characters per line: 20
More Printer Control Codes
Based on information from http://www.posbundles.com/support.htm
Epson and Samsung control codes: Cash drawer trigger: 27,112,0,48 Partial cut (option): 27,105
Epson alternate cash drawer trigger: 27,112,0,64,240 (generates longer pulse)
Star control codes: Cash drawer trigger: 7 Partial cut (option): 27,100,48 or 27,100,49
Citizen control codes: Cash drawer trigger: 7 Partial cut (option): 27,80,00 or 27,80,01
Ithaca POSjet control codes: Cash drawer trigger: 27,120,1 Auto-cut (option): 27,118
Here is a list of older cash drawer commands as well.
Drawers Kick Commands: (Citizen, Star & Ithaca) Advance Page Cutter Commands: 46,13,10,10,10,10 (10 is the Line Feed) (Epson Only) Advance Page Cutter Commands: ESC,10,10,10, Cash Drawer Commands: Star: 7,27 Citizen: 07 or 7 Epson: 27,112,0,50,250
Under NT-based systems, if paper cut doesn't work, change the printer data format from RAW to TEXT.
Pinouts
Epson pinout
1 chassis ground 2 electrical ground (positive) 3 unknown (tied to 4 in cash drawer) 4 +5V 5 goes to unused spade connector in drawer 6 drawer open signal
BEGIN ADDED Sept 8, 2005 by Ryan Osman:
We are building a noisemaker that plugs into the DK jack of the Epson TM-T88 III, and my tests show different pin assignments than the info above. Here's what I found:
Epson TM-T88 III DK jack pinout
1 ground 2 unknown 3 +24v 4 +5v, but very little current (1.3 ma)... I suspect this is an input, or available as pullup for drawer kick). 5 drawer kick signal (sinks to ground, use a pullup.) 6 unknown
Ryan, www.trinity-electronics.com
END ADDED Sept 8, 2005 by Ryan Osman
Star pinout
1 drawer open signal 2 +5V 3 electrical ground (positive) 4 unused 5 unused 6 unused
Printer tests
For all tests, first turn printer off (or unplug), then on (or plug in), to ensure that they are in a known state. If printer has a soft-off button, then printer should be unplugged to ensure that it really is off.
Hewlett-Packard
Cleaning and cartridge info for several HP models: http://h10025.www1.hp.com/ewfrf/wc/fastFaqLiteDocument?lc=sv&cc=se&dlc=sv&docname=bpd07585
HP DesignJet 10/20/50PS
- Lights
- Power
- On when power is on. Use POWER button to control state.
- Attention
- On when there's a problem.
- Power
- Buttons
- POWER
- Turns printer on or off. Power light shows state
- CANCEL
- Cancels current operation
- CONTINUE
- Tells printer that you have fixed problem and to continue printing.
- POWER
- Icons
- Busy
- Off
- Printer is off, idle, or waiting for user
- Flashing
- Printer is printing, powering off, drying, or cancelling job
- Flickering
- Top or side cover is open; close covers
- Off
- Paper Status
- Flashing
- Out of paper or paper stalled
- Off
- Normal
- Flashing
- Press a button
- Flashing
- Printer waiting, press POWER, CANCEL, or CONTINUE, as appropriate
- Off
- Normal
- Flashing
- Paper jam
- Flashing
- Paper jammed, paper stalled, carriage stalled
- Off
- Normal
- Flashing
- Call HP
- Flashing
- Hardware error, call for support
- Off
- Normal
- Flashing
- Ink cartridge status
- On
- Height of bar indicates amount of ink
- Flashing
- Ink is low
- All icons flashing
- Either all cartridges are low or else there is a problem with the cartridge system.
- Off
- Printer is off or powering up
- On
- Printhead status
- On
- Normal
- Flashing
- Printhead failure
- Off
- Printer is off or printhead is being replaced
- On
- Busy
HP Designjet 330
HP Designjet 350C
- Lights
Plain Error Film Media Ready Roll Coated
Off Off Off Off Off Off ----- Power is off
Blink Blink ----- ----- ----- --- ----- Current plot is too large for memory
----- Blink Blink ----- ----- --- ----- A cartridge is bad, misplaced, missing, or mis-seated
----- ----- ----- On Off --- ----- Printer ready, media needed
----- ----- ----- On Blink --- ----- Printer has data, but needs media
----- ----- ----- Blink Off --- ----- Realign media
----- Blink ----- Blink ----- --- ----- Loaded sheet is misaligned, invalid media size, media
--- ----- lever is lowered, cover is open
----- On ----- ----- ----- --- ----- System error. Turn power off and on.
----- Blink ----- ----- Blink --- ----- Check serial cable and interface settings
----- ----- ----- ----- Off --- ----- Printer is not read; check other lights.
----- ----- ----- ----- On --- ----- Printer is ready
----- ----- ----- Off Blink --- ----- Printer is receiving data or printing
----- ----- ----- ----- ----- On ----- Set for roll media
----- ----- ----- ----- ----- Off ----- Set for sheet media
----- ----- ----- ----- Off On ----- Roll needs to be cut. Cut, then press CONTINUE
PLOTTING
----- ----- ----- ----- Off Blink ----- Continuous plotting mode. Press CONTINUE PLOTTING
to switch to PAUSE mode
----- Blink ----- ----- ----- ----- Blink The carriage is sensing an open between the
cartridge(s) and carriage. Remove cartridges
and reseat 1 at a time. Watch the Ready light.
If it flashes it has accepted the cartridge.
If the Ready light does not flash it is not
accepting that cartridge.
HP DeskJet 340
HP DeskJet 350
- Lights (may only apply to 340)
Power Paper Change Charge
Off ----- ------ ------ Printer is off. Press to turn on
On ----- ------ ------ Printer is on. Press to turn off
Blink ----- ------ ------ Printer is receiving data or printing
On Blink ------ ------ Out of paper. Add new paper, then press PAPER FEED button
If not out of paper, check that paper is loaded correctly.
Press PAPER FEED button to continue printing
On ----- Blink ------ Waiting for you to change cartridge
----- ----- ------ On Battery pack is being charged
----- ----- ------ Blink Printer is discharging/using battery pack
On ----- ------ Blink Battery pack is low. Connect the power adapter.
----- ----- ------ Off Battery pack is charged or there is no battery pack
Alt Alt Alt Alt Battery pack problem. Make sure pack is seated properly.
Clean pack contacts. Discharge pack and recharge. Make
sure using recommended pack. Replace pack.
Blink Blink Blink Blink Fatal error. Turn off then back on. If still error, press
and hold PAPER FEED and look up light pattern below:
Power Paper Change
On Off Off Paper is jammed or paper sensor is bad.
Off Off On Cartridge is jammed or cradle lock may be jammed
Off On On Service station stall. Make sure rubber cap is facing up.
On On Off Internal error. Turn printer off and on. Turn printer off,
remove pack, plug in adapter, turn back on.
On Off On Internal error. See above
On On On Internal error. Printer requires service.
- Buttons (may only apply to 340)
- POWER
- Press to turn printer on or off
- PAPER FEED
- Press to turn off Paper light. Press and hold to eject paper
- CHANGE CARTRIDGE
- Press to move cartridge to changing position. Press again when done changing
- cartridge.
- POWER
- To run a self-test
- Turn off the printer.
- Press and hold Paper Feed.
- Turn on the printer.
- Once the power light is on, release the Paper Feed.
- Test pages
- Press and hold POWER.
- Press PAPER FEED the specified number of times
- Release POWER
- PAPER FEED Results
- 5 Regular diagnostic (may only apply to 350)
- 7 Pen recovery page (may only apply to 350)
- 12 Extended diagnostic (may only apply to 350)
HP Deskjet 400
HP Deskjet 400L
HP Deskjet 420C
HP Deskjet 200Cci
- To run a self-test
- Turn the printer off.
- Press and hold PAPER FEED.
- Turn the printer on.
- Once the power light is on, release PAPER FEED.
- To run a clean test (may be the same as a self-test)
- Press and hold CHANGE CARTRIDGE for 5 seconds.
HP Deskjet 500
HP Deskjet 500C
HP Deskjet 520
HP Deskjet 550C
HP Deskjet 560C
- To run a self-test
- Press and hold FONT and RESET, or LOAD EJECT
- Turn on the printer.
- Release the buttons when the printer starts printing.
- To run a clean test
- Press CLEAN.
- To run an alignment test
- Press ALIGNMENT TEST.
HP Deskjet Plus
HP Deskjet 500
- Lights
COUR COUR LAND- DOUBLE
BUSY ONLINE 10/20 16.67 SCAPE DRAFT PITCH
Blink Blink Blink Blink Blink Blink Blink Unrecoverable error. See if printer
works without plug-in cartridge. If so,
cartridge is bad, else printer is bad.
Blink ----- ----- ----- ----- ----- ----- Data in buffer. If not printing, press
FF.
Blink Blink ----- ----- ----- ----- ----- Paper jam
----- Blink ----- ----- ----- ----- ----- Out of paper
----- Alt Alt ----- ----- ----- ----- Carriage stall
----- ----- Alt Alt ----- ----- Alt Electronics failure. Have printer
serviced.
Alt Alt ----- ----- ----- ----- ----- Electronics failure. Have printer
serviced.
----- ----- ----- ----- Alt Alt ----- Add-in cartridge failed.
----- Alt ----- ----- ----- Alt Alt Incompatible add-in cartridge
----- ----- Alt Alt ----- ----- ----- RAM cartridge failure.
(other lights flashing alternately) Carriage stall
- Test
- Self-test
- Turn off printer
- Press and hold FONT
- Turn on printer
- Release FONT after printer picks up paper.
- Self-test
HP Deskjet 540
HP Deskjet 600
HP Deskjet 600C
HP Deskjet 610C
HP Deskjet 630C
HP Deskjet 632C
HP Deskjet 640C
get a new printer
HP Deskjet 642C
HP Deskjet 648C
HP Deskjet 660C
HP Deskjet 670C
HP Deskjet/DeskWriter 680C
HP Deskjet 682C
HP Deskjet 690C
HP DeskWriter 694C
- To run a self-test
- Press and hold RESUME until the printer starts printing.
- This may need to be performed several times before the printer prints the page.
- Continuous print self-test
- Press and hold Power.
- Press Resume 10 times.
- Release the Power.
- This may need to be performed several times before the printer prints the page.
- Turn the power off to stop the self-test.
- To run a clean-test
- Press and hold POWER.
- Press RESUME 7 times.
- Release the POWER.
- This may need to be performed several times before the printer prints the page.
- To run a diagnostic-test
- Regular
- Press and hold POWER.
- Press RESUME 5 times.
- Release the POWER.
- Extended
- Press and hold POWER.
- Press RESUME 12 times.
- Release the POWER.
- Regular
HP Deskjet 710C
HP Deskjet 720C
HP Deskjet 820C
HP Deskjet 820Cse
HP Deskjet 820Cxi
- To run a self-test
- Make sure the Power Led is lit
- Press and hold POWER.
- Press RESUME/FORM FEED 4 times.
- Release the POWER.
- This may need to be performed several times before the printer prints the page.
HP Deskjet 810C
HP Deskjet 830C
HP Deskjet 880C
HP Deskjet 895C
- Run a self-test
- Press and hold RESUME until the printer starts printing.
- Release the RESUME.
- To run a diagnostic test
- Press and hold POWER.
- Press RESUME 4 times.
- Release the POWER.
HP Deskjet 850C
HP Deskjet 850K
HP Deskjet 855C
HP Deskjet 855Cse
HP Deskjet 855Cxi
HP Deskjet 870C
HP Deskjet 870Cse
HP Deskjet 870Cxi
HP Deskjet 870K
HP Deskjet 890C
HP Deskjet 890Cse
- To run a self-test
- Press and hold RESUME until the printer starts printing.
- Release RESUME.
- To run a clean test (may not apply to 855Cse and 855Cxi)
- Press and hold POWER.
- Press RESUME 7 times.
- Release the POWER.
- To run a diagnostic test
- Press and hold POWER.
- Press RESUME 5 times.
- Release the POWER.
- Lights
RESUME POWER
OFF OFF Power is off; press the Power button to turn on. Check power cable.
OFF ON Printer is ready to print.
ON ON Printer won't print. Turn off, wait half a minute, turn on. If that fails, have printer serviced.
BLINK ON Top cover is open. Close cover.
BLINK ON Out of paper. Add more paper and press the RESUME button.
BLINK ON Paper did not eject. Press the RESUME button.
BLINK ON Paper jam.
BLINK ON Print cartridge is missing, empty, or improperly installed. Remember to remove tape from cartridges.
ALT ALT Paper jam or stuck carriage.
ALT ALT Printer is not working correctly. Turn off, unplug power cable and printer cable, wait half a minute,
plug in, turn on.
ALT ALT Wrong printer driver.
ALT ALT Printer and computer not communicating properly. Turn printer off, disconnect printer cable, turn
printer on, do self test to confirm printer is ok. Hook up printer cable agin, try to print again.
BLINK BLINK Printer not working. Turn printer off. Unplug power cable and printer cable. Wait half a minute.
Plug in. Turn power on.
HP Deskjet 916C
HP Deskjet 920C
HP Deskjet 920Cvr
HP Deskjet 920Cxi
HP Deskjet 930C
HP Deskjet 930Cm
HP Deskjet 932C
HP Deskjet 934C
HP Deskjet 935C
HP Deskjet 940C
HP Deskjet 940Cvr
HP Deskjet 940Cw
HP Deskjet 940Cxi
HP Deskjet 948C
HP Deskjet 950C
HP Deskjet 952C
HP Deskjet 955C
HP Deskjet 957C
HP Deskjet 959C
HP Deskjet 960Cse
HP Deskjet 960Cxi
HP Deskjet 970Cse
HP Deskjet 970Cxi
HP Deskjet 980Cxi
HP Deskjet 990Cm
HP Deskjet 990Cse
HP Deskjet 990Cxi
HP Deskjet 995C
HP Deskjet 1220C Professional
- Buttons
- CANCEL
- Cancels current print job
- RESUME
- Resumes print job. Causes Resume light to go out.
- POWER
- Turns power and power light on and off
- CANCEL
- Lights
Cover Cartridge Resume Power
Closed Blink ------ On Problem with cartridges
Open Blink ------ On Problem with cartridges, but not low ink
Open Stops ------ On Low ink
------ --------- On On Printer is paused, press RESUME to continue
------ Off Off On Printer is on and ready
------ --------- ------ Off Printer is off or in sleep mode. Press Power button.
------ --------- Off Blink Printer is receiving data, printing, or cancelling
------ Off On On Rear module open or not installed properly
------ Off Blink On Paper out, paper jam, ready to eject paper, waiting
for paper to dry, or timeout waiting for data
Closed Blink Off On Print cartridge error
------ Off Alt Alt Paper not feeding correctly.
------ Off Blink Blink Carriage is stuck.
------ On Off On Open top cover, unplug for 1 min, plug in again.
------ Alt Alt Alt Shutting down or starting up.
Open Blink Off On Carriage status
Arrow on carriage lines up with first icon
Color cartridge not detected -- wrong, missing, defective, or not installed (properly)
Arrow on carriage lines up with second icon
Black cartridge not detected -- wrong, missing, defective, or not installed (properly)
Arrow on carriage lines up with third icon
Color cartridge is low/empty
Arrow on carriage lines up with fourth icon
Black cartridge is low/empty
Arrow on carriage lines up with fifth icon
Nothing wrong
------ Off Alt Alt Paper stall
------ Off Blink Blink Carriage stall
------ Alt Alt Alt Fatal error
- Test pages
- Press and hold POWER.
- Press "X" (Cancel Print) the specified number of times
- Press RESUME/FF the specified number of times.
- Release POWER
X RESUME/FF Results 0 1 Flower picture (head first) 0 3 Alignment (calibration page) 0 4 P/C, Page count (diagnostic page) 0 7 Paper-indent-exactness? 0 8 Infinite "H" test 1 1 P/C, Page count, Paper-sizing-dates 1 2 ROM-Dump, P/C, Alignment-dates 2 0 Pen recovery diagnostic test: light cartridge cleaning 2 1 Pen recovery diagnostic test: Intermediate cleaning 2 2 Pen recovery diagnostic test: Intensive cleaning 3 0 Duplex test 3 1 Duplex test on 970Cxi 3 1 Flower picture continued 4 1 Cartridges identification-dates / filler situation 8 4 Nozzle pattern test
HP DeskJet 1100C
- To print a self-test
- Press and hold Resume until it starts to blink.
- To print a diagnostic test page
- Press and hold Power
- Press Resume 4 times
- Release power
- To print continuous diagnostic pages
- Press and hold Power
- Press Resume 5 times
- Release Power
- To stop printing the continuous diagnostic test pages, turn off the printer.
- To print a clean test
- Press and hold Power
- Press Resume 7 times
- Release Power.
HP Business Inkjet 2200
HP Business Inkjet 2250
- To print a sample page
- Press Menu until INFORMATION MENU appears.
- Press Item until PRINT DEMO appears.
- Press Resume to print the sample page.
- To print a configuration page
- Press Menu until INFORMATION MENU appears.
- Press Item until PRINT CONFIGURATION appears.
- Press Resume to print the configuration page.
- To print the diagnostic test page
- Press Menu until INFORMATION MENU appears.
- Press Item until PRINT DIAGNOSTIC PAGE appears.
- Press Resume to print the diagnostic page.
HP 2500C Professional
- The Paper Path Test
- Press MENU until "DIAGNOSTICS MENU" appears.
- Press ITEM until "PERFORM TRAY X PAPER PATH TEST" appears, where X represents the tray number.
- Press SELECT to perform the test.
- The Clean Printheads procedure
- Press MENU until Diagnostics Menu appears.
- Press ITEM to select either Clean Prnt-Hds Level 1, 2, or 3.
- Press SELECT to clean the printheads.
- The Align Printheads procedure
- Press MENU until Diagnostics Menu appears.
- Press ITEM until ALIGN PRNT-HDS appears.
- Press SELECT.
- To print a Diagnostic Test
- Press MENU until Self-Test Menu appears.
- Press ITEM until Print Diagnostic Page appears.
- Press SELECT to print the diagnostic page.
HP DeskWriter 550C
HP DeskWriter 520
HP DeskWriter 560C
HP DeskWriter C
- Self Test
- Turn off the printer.
- Press and hold SELECT
- Turn on the printer
- Release SELECT when all lights come on
- Self test will print
- Clean printhead
- Press and hold SELECT
- Press INSTALL PRINT CARTRIDGE.
- Release SELECT
HP DeskWriter
- Self Test
- Turn off printer
- Press and hold SELECT
- Turn on printer
- Release SELECT when all lights come on
- Prime
- Press Prime
HP LaserJet Series II
HP LaserJet IIISi
- Press ON LINE to take the printer offline.
- Press and hold TEST until the self-test begins
HP LaserJet IIP
HP LaserJet IIP Plus
HP LaserJet IIIP
- Press ON LINE to take the printer offline.
- Press and hold ALT
- Press and hold TEST until the self-test begins
- Release both keys
HP LaserJet 4P
HP LaserJet 4MP
HP LaserJet 4
HP LaserJet 4M
HP LaserJet 4 Plus
HP LaserJet 4M Plus
HP LaserJet 4V
HP LaserJet 4MV
HP LaserJet 4si family
HP LaserJet 4si MX
HP LaserJet 5
HP LaserJet 5M
HP LaserJet 5N
HP LaserJet 5se printer
HP Color LaserJet 5 family
HP LaserJet 5si family
HP LaserJet 5si Mopier
- You may need to press ON LINE to take the printer offline.
- Press MENU repeatedly until TEST MENU, PS TEST MENU, or PCL TEST MENU appears.
- Press ITEM repeatedly until the desired test is selected.
- Press SELECT/ENTER.
- The selected test page will print.
HP LaserJet 4L
HP LaserJet 4ML
HP LaserJet 5L
HP LaserJet 6L
HP LaserJet 1100
HP LaserJet 1200 series
- Lights (4L)
- All lights lit
- Unplug printer
- Plug printer in
- Print a self-test
- If all lights come on again, printer needs service
- Otherwise, change resolution, graphics mode, set to Print TrueType as Graphics, and
- try Laserjet III driver. If none work, contact HP.
- All lights lit
- Lights (5L, 6L)
Error Data Ready
On Off Off Paper out, door open, no cartridge, paper jam
Blink Off Off Memory error
Blink Blink Blink Incompatible memory card
Off Blink Off Manual feed
Off Off Off Sleep mode or printer is off
On On On Service error. Press and hold front panel button to see service codes
Cycle power and print test page to see if error persists
- Service codes
Error Data Ready On Off Off Unclearable error, engine error Off Off On ROM/RAM error On Off On Fuser error On On Off Beam error Off On Off Scanner error x On On Formatter PCA error Off Blink Blink Firmware error
- Self-test
- Make sure that the printer is in the Ready state. If necessary, wake up the printer by pressing and releasing Front Panel button or GO.
- Press Front Panel button or GO.
- The Self-Test page will print.
- Continuous self-test (doesn't seem to apply to 1100)
- Unplug the printer
- Press and hold the front panel button or GO.
- Plug in the printer
- Hold the front panel button or GO for 5 seconds, then release. DO NOT hold GO any longer than 15 seconds. (4L/4ML/5L)
- Hold GO for 15 seconds, then release. DO NOT hold GO any longer than 15 seconds. (1200)
- To stop the test, press and hold the front panel button or GO until the lights circulate. DO NO hold for longer than 15 seconds. (4L/4ML/5L)
- To stop the test, press the front panel button or GO. (1200)
- General reset
- Press and hold GO for 5 seconds or unplug and plug in the printer. DO NOT hold GO for longer than 15 seconds.
- Cold reset all defaults (may apply only to 1200 and 2200)
- Unplug the printer
- Remove JetDirect card or disconnect external JetDirect devices, if any.
- Press and hold GO.
- Plug in the printer.
- Continue holding GO for at least 20 seconds.
- NVRAM will be reinitialized with defaults, including page count and electronic serial number.
- To restore serial #, see http://www.hp.com/cposupport/printers/support_doc/bpl10510.html
HP LaserJet 5P
HP LaserJet 5MP
HP LaserJet 2100
HP LaserJet 6P
HP LaserJet 6MP
HP LaserJet 2200 family
- Self-test
- Simultaneously press GO and JOB CANCEL/RESET
- The Self-Test page will print.
- Continuous self-test (may apply only to 2200)
- Turn off the printer
- Remove the JetDirect card, if any.
- Press and hold JOB CANCEL/RESET
- Turn on the printer
- Release JOB CANCEL/RESET when the self-test begins
- This may need to be performed several times before the printer prints the page.
- Cold reset (may apply only to 1200 and 2200)
- Unplug the printer
- Remove JetDirect card or disconnect external JetDirect devices, if any.
- Press and hold GO.
- Plug in the printer.
- Continue holding GO for at least 20 seconds.
- NVRAM will be reinitialized with defaults, including page count and electronic serial number.
- To restore serial #, see http://www.hp.com/cposupport/printers/support_doc/bpl10510.html
HP LaserJet 3100
HP LaserJet 3150
HP LaserJet 3200
- Self test
- Press ENTER/MENU.
- Use the < and > keys to select Reports, then press ENTER/MENU.
- Use the < and > keys to select Self Test or Configuration Report, then press ENTER/MENU.
- If serial number is cleared, see http://www.hp.com/cposupport/printers/support_doc/bpl10510.html
HP LaserJet 4000 family
HP LaserJet 4050 family
HP LaserJet 5000 family
HP LaserJet 8000 family
HP LaserJet 8100 family
HP LaserJet Mopier 24
HP LaserJet 320 Mopier
HP Color LaserJet 4500
HP Color LaserJet 4550
Color HP LaserJet 8500 family
- Self-test/config page
- Press MENU repeatedly until INFORMATION MENU appears.
- Press ITEM repeatedly until PRINT CONFIGURATION or PRINT CONFIG PAGE appears.
- Press SELECT to print the configuration page.
- The configuration page will print.
- Cold reset
- Unplug the printer
- Remove JetDirect card or disconnect external JetDirect devices, if any.
- Press and hold GO.
- Plug in the printer.
- Continue holding GO for at least 20 seconds.
- NVRAM will be reinitialized with defaults, including page count and electronic serial number.
- To restore serial #, see http://www.hp.com/cposupport/printers/support_doc/bpl10510.html
- Engine test
- Press the button located in the hole below the fan exhaust on the left side of the printer
- Print Event Log
- Press MENU repeatedly until INFORMATION MENU appears.
- Press ITEM repeatedly until PRINT EVENT LOG appears.
- Press SELECT to print the event log.
- The event log will print.
HP RuggedWriter
- For single sheet paper
- Turn printer OFF
- Press and hold LF
- Turn printer on
- Release LF
- For continuous-feed paper
- Turn printer OFF
- Press and hold FF
- Turn printer on
- Release FF
HP OfficeJet LX All-in-One
HP OfficeJet 350 All-in-One
- Turn printer on
- Press MENU
- Press PRINTER/RESET
- Press ENTER/SAVE
- Press PRINTER/RESET 2 times
- For the HP OfficeJet LX, press PRINTER/RESET again.
- Press ENTER/SAVE
Canon
Canon BJC-210
Canon BJC-240
Canon BJC-250
Canon BJC-255
Canon BJC-265
Canon BJC-4100
Canon BJC-4200
Canon BJC-4300
Canon BJC-4400
Canon BJC-4550
Canon BJC-4650
- Cleaning Print Head
- Switch printer on.
- Hold down the RESUME button for 2 (3?) beeps.
- Demo Test
- Switch Printer off.
- Hold down power button for 1 beeps.
- Press RESUME to stop.
- Status Test
- Switch Printer off.
- Hold down power button for 2 beeps.
- Press RESUME to stop.
- Ripple Test
- Switch Printer off.
- Hold down power button for 3 beeps.
- Press RESUME to stop.
- Nozzle Test
- Switch Printer off.
- Hold down power button for 4 beeps.
- Press RESUME to stop.
- All Fonts Test
- Switch Printer off.
- Hold down power button for 4 beeps.
- Press RESUME to stop.
- Reset
- Switch printer off.
- Switch printer on.
- Hold down power button for 6 beeps.
- Waste Error Reset:
- Unplug Power Cord
- Hold POWER and RESUME buttons
- Plug in Power Cord
- Release buttons
- Open front door of printer
- Hold the CARTRIDGE and RESUME buttons
- Press POWER
- Release all buttons after the beeps
- Press CARTRIDGE once
- Press RESUME
- Error Codes
- Power Indicator
Error Color Beeps Error/Cause Solution
Off No Power
On Green Ready State
On Orange 1 Out of paper
Add Paper and press Resume
On Orange 1 Paper Pickup Error
Clear paper jam and press Resume
On Orange 2 Paper Jam
Clear paper jam and press Resume
On Orange 5 Cartridge Mode Mismatch
When wrong cartridge is installed for Printing or Scanning.
Blinks Green 1 Cartridge Not detected
Install or replace cartridge. You will notice the carriage will be in the middle postion.
Blinks Grn/Orang 1 RAM Error
Unplug printer for 20 seconds, if problem persists then printer requires service.
Blinks Grn/Orang 2 ROM Error
Unplug printer for 20 seconds, if problem persists then printer requires service.
Blinks Grn/Orang 3 Cartridge Displacement error
Try replacing the Cartridge or Requires Service
Blinks Grn/Orang 4 Home Position Error
Remove the cartridge and check to make sure nothing is blocking the path of the carriage,
if not then the printer requires a service
Blinks Grn/Orang 5 Waste Full
Requires Service (open printer and clean out waste collector)
Blinks Grn/Orang 6 Temperature Sensor Error
Try replacing the Cartridge or Requires Service
Blinks Grn/Orang 7 Print Position
Unplug printer for 20 seconds, if problem persists then printer Requires Service.
Blinks Grn/Orang 8-9 Head temp or sensor error
Try replacing the Cartridge or Requires Service
Blinks Grn/Orang 10 Cleaning Error
Remove cartridge and check to make sure nothing is blocking path of carriage, if not then
printer requires service
Blinks Grn/Orang 11 Scanner Cartridge IS-22 Displacement
Occurs when IS scanner cartridge is detected but cannot correctly identify it, Try resetting
IS cartridge
Canon BJ 10-Series
Power Online Error Paper Beeps Error On Off On Off 2 or 3 Out of paper On Off On Continously Paper Jam or Paper too long On Off Blinks Continously Carriage error - SERVICE On Blinks Off 5 Software related - SERVICE On Blinks Off Continously RAM Error - SERVICE On Blinks Blinks 3 ROM Error - SERVICE Blinks Off Off Every Second The battery is recharging Blinks Off Off Every 1/2 second The battery is low Blinks Off On 5 Battery is exhausted - SERVICE Blinks Off On Continously Logic Card error - SERVICE Blinks Off Blinks 5 Battery fault - SERVICE
Canon BJ 30
Error Cause C1 Waste Ink Warning C5 Low Battery Warning E1 Paper Pickup Error or out of paper E2 Paper Delivery Jam E6 Not detecting the print head - replace printhead, evtl. SERVICE FC Low Battery Error F12 PrintHead Temperature Error - replace printhead, evtl. SERVICE F13 Print Head Installation Error - replace printhead, evtl. SERVICE F14 Waste Ink is Full - SERVICE Online button blinks Cartridge/Printhead not detected - replace printhead, evtl. SERVICE
Canon BJ 200
Canon BJC 210
Canon BJC 230
Power Online HS HQ Error Beeps Cause On On 3 Paper Pickup Error or out of paper On On 4 Paper Jam On Flash Flash Flash On 3 Carriage Control Error - SERVICE On Flash Flash Flash On 4 Cleaning Error - SERVICE On Flash Flash Flash On 5 Temperature Sensor Error - SERVICE On Flash Flash Flash On 6 ROM/RAM Error - SERVICE
Canon BJ 300
Canon BJ 330
Power Online HS HQ Cour Pres Goth Ink/Paper Beeper Error/Cause On Off Off On 3 Paper Out or Paper Jam On Off Off Flash 3 Out of Ink or no cartridge installed error On Off Flash Flash Off Off 6 Print Head Home Position Error - SERVICE On Off Flash Flash Flash Off 6 ROM/RAM Error - SERVICE On Off Off Flash Off Off None Battery Low warning for RAM Card
Canon BJC50
Canon BJC55
Error Power LED LED Beeps Error Condition Steady Steady 1 Paper Pickup Steady Steady 2 Paper Delivery Steady Steady 3 BJ Cartridge Not Detected, replace printhead, evtl. SERVICE Steady Steady 4 Cartridge Mismatch, replace printhead, evtl. Service Steady Steady 6 No Battery - SERVICE Steady Steady Long / Short Low Battery Warning Blinks Steady 1 Manual Feed Error - SERVICE Blinks Steady 2 Low Ink Blinks Steady 3 Cartridge Error, replace printhead, evtl. SERVICE Blinks Steady 4 Low Battery Warning Blinks Steady 5 Waste ink warning Blinks Steady 6 Failed Battery Warning - SERVICE Blinks Blinks 1 ROM error - SERVICE Blinks Blinks 2 RAM error - SERVICE Blinks Blinks 4 home position error - SERVICE Blinks Blinks 5 Waste Ink Full error - SERVICE Blinks Blinks 6 Thermistor error - SERVICE Blinks Blinks 7 Print position correction error - SERVICE Blinks Blinks 12 Akku error, neuen Akku einsetzen, evtl. SERVICE
Canon BJC70
Canon BJC75
Error Cause C1 Waste Ink Warning C5 Low Battery Warning E1 Paper Pickup Error or out of paper E2 Paper Delivery Jam E6 Not detecting the print head, replace printhead, evtl. SERVICE FC Low Battery Error F12 PrintHead Temperature Error, replace printhead, evtl. SERVICE F13 Print Head Installation Error, replace printhead, evtl. SERVICE F14 Waste Ink is Full - SERVICE Online button blinks Cartridge/Printhead not detected, replace printhead, evtl. SERVICE
Canon BJC80
Canon BJC85
Power Error Beeps Error Condition On On 1 Paper Pickup Error or out of paper On Blinks 2 Low Ink Warning On On 2 Paper Jam On On 3 BJ Cartridge Check, replace printhead, evtl. SERVICE On Blinks 4 Low Battery Warning On On 4 Cartridge Mismatch, replace printhead, evtl. SERVICE On Blinks 5 Waste Ink Warning Blinks Blinks Long / Short Low Battery Error Blinks Blinks 1, 2 ROM / RAM or EEPROM fault - SERVICE Blinks Blinks 3 Cartridge out of position - SERVICE Blinks Blinks 4 Carriage home postion error - SERVICE Blinks Blinks 5 Waste Ink Full - SERVICE Blinks Blinks 6 Temperature Error - SERVICE Blinks Blinks 7 Print position - SERVICE Blinks Blinks 8 Temperature Error - SERVICE Blinks Blinks 9 Diode error (printhead) , replace printhead, evtl. SERVICE Blinks Blinks 10 Cleaning Fault - SERVICE Blinks Blinks 11 EEPROM - SERVICE
Canon BJC240
Canon BJC250
Error State Color Beeps Cause / Error Blinks Green Cartridge is not installed or not installed correctly On Orange 1 Paper Pickup Error or out of paper On Orange 2 Paper Jam Blinks Orange 1 or 2 ROM or RAM fault - SERVICE Blinks Orange 3 Cartridge out of position, replace printhead, evtl. SERVICE Blinks Orange 4 Carriage home position error - SERVICE Blinks Orange 5 Waste Ink Full - SERVICE Blinks Orange 6 Over Temperature Error - SERVICE Blinks Orange 7-10 Print position or Cleaning fault - SERVICE
Canon BJC600
Canon BJC600e
Power Beeps Error Online BK C M Y Env Thick Error Condition On 2 Blink Blink WASTE INK warning On 3 Blink On Carriage Error (head movement) - SERVICE On 3 Blink On Home Position Error (head movement) - SERVICE On 3 Blink On On Encoder Error (Codierer-fehler) - SERVICE On 3 Blink On Purge Error - SERVICE On 3 Blink On On Paper Feed Motor Error - SERVICE On 3 Blink On On Auto Sheet Feeder Home Position Error - SERVICE On 3 Blink On On On Internal Temperature Error - SERVICE On 3 Blink On WASTE INK is FULL - SERVICE On 3 Blink On On EEPROM Error - SERVICE On 3 Blink On ROM Error - SERVICE On 3 Blink On On RAM Error - SERVICE On 3 Blink On On Gate Array Error - SERVICE On 3 Blink Blink Blink PrintHead Error, replace head, evtl. SERVICE
Canon BJC610
Canon BJC620
Power Beeps Error Online BK C M Y Ink Env Error Condition On 2 Blink Blink WASTE INK warning On 3 Blink On Carriage Error - SERVICE On 3 Blink On Home Position Error - SERVICE On 3 Blink On On Encoder Error - SERVICE On 3 Blink On Paper Feed Motor Error - SERVICE On 3 Blink On On Auto Sheet Feeder Home Position Error - SERVICE On 3 Blink On On Internal Temperature Error - SERVICE On 3 Blink On WASTE INK is Full - SERVICE On 3 Blink On On EEPROM Error - SERVICE On 3 Blink ON ROM Error - SERVICE On 3 Blink On On RAM Error - SERVICE On 3 Blink On On Gate Array Error - SERVICE On 3 Blink On On On Ink Detection - SERVICE On 3 Blink PrintHead Error, replace printhead,, evtl. SERVICE
Canon BJC800
Canon BJC820
Error Code Error Condition 10 CHECK PAPER Paper Pickup Error / No Paper 12 COVER OPEN Cover is open 13 CHECK PAPER Paper Jam or Exit Paper Jam 14 NO INK CART. Ink cartridge(s) not installed 16 NO BLACK INK Require Black ink 16 NO YELLOW INK Requires Yellow ink 16 NO MAGENTA INK Requires Magenta ink 40 SERVICE SCSI interface error - SERVICE 50 Service Carriage errors - SERVICE 51 Service Capping error - SERVICE 52 Printhead 53 Printhead 54 Printhead 55 Printhead 56 Printhead 57 Printhead 58 Printhead 59 Printhead 5A,5B,5C,5D SERVICE Ink detection errors - SERVICE 5E / 5F SERVICE Carriage Motor errors - SERVICE 61,62,63,65,66,68,72 SERVICE Internal hardware errors - SERVICE 65 Service 1 Beep Engine Rom checksum error - SERVICE 65 Service 2 Beeps Engine Ram checksum error - SERVICE 65 Service 3 Beeps Printer Controller Error 2 Error - SERVICE 65 Service 4 Beeps Printer Controller Error 2 Error - SERVICE 65 Service 5 Beeps Flexible Cable Check Error 1 - SERVICE 65 Service 6 Beeps Flexible Cable Check Error 2 - SERVICE 65 Service 7 Beeps No Operator display - SERVICE 65 Service 8 Beeps Controller Error - SERVICE
Canon BJC1000
Error Indication on Computer Error Code Error Condition The Printer is out of paper Paper Feed A paper jam has occurred Paper Jam An error that possibly requires a service call has occurred 6800 EEPROM - SERVICE An error that possibly requires a service call has occurred 5000 Home Position - SERVICE An error that possibly requires a service call has occurred 5400 Temperature Sensor - SERVICE An error that possibly requires a service call has occurred 5600 No Cartridge Error, replace printhead, evtl. SERVICE An error that possibly requires a service call has occurred None Waste Full - SERVICE An error that possibly requires a service call has occurred 5C00 Cleaning Error - SERVICE
Canon BJC2000
Canon BJC2100
Error Indication on Computer Error Code Error Condition The Printer is out of paper Paper Feed A paper jam has occurred Paper Jam The printer's front cover is open Cover is open BJ Cartridge error occured No cartridge, replace printhead, evtl. SERVICE An incorrect cartridge was installed in the printer. Head Mismatch, replace printhead, evtl. SERVICE An error that possibly requires a service call has occurred 6800 EEPROM - SERVICE An error that possibly requires a service call has occurred 5000 Home Position - SERVICE An error that possibly requires a service call has occurred 5100 Carriage Error - SERVICE An error that possibly requires a service call has occurred 5400 Temperature Sensor - SERVICE An error that possibly requires a service call has occurred 5600 No Cartridge Error, replace printhead, evtl. SERVICE An error that possibly requires a service call has occurred None Waste Full - SERVICE An error that possibly requires a service call has occurred 5C00 Cleaning Error- SERVICE An error that possibly requires a service call has occurred 5210 Scanner IS-22 defekt
Canon BJC3000
Indicator Beeps Error Condition Orange 2 Paper Feed / Delivery Orange 3 Paper Jam Orange 4 Ink Out Orange 5 BJ Cartridge Misinstalled, replace printhead, evtl. SERVICE Orange 6 NO BJ Cartridge, replace printhead, evtl. SERVICE Orange 7 BJ Cartridge Error, replace printhead, evtl. SERVICE Orange 8 Waste Full warning
Blinks Beeps Service Errors 1 x Orange 10 ROM Error- SERVICE 2 x Orange 10 RAM Error- SERVICE 3 x Orange 10 EEPROM- SERVICE 4 x Orange 10 Home Position- SERVICE 5 x Orange 10 Temperature Sensor- SERVICE 6 x Orange 10 Waste Full- SERVICE 7 x Orange 10 Cartridge OverHeat, replace printhead, evtl.SERVICE 8 x Orange 10 Cartridge OverHeat replace printhead, evtl.SERVICE 9 x Orange 10 Cartridge Displaced replace printhead, evtl.SERVICE 10 x Orange 10 Cartridge Displaced replace printhead, evtl.SERVICE 11 x Orange 10 Cartridge Displaced replace printhead, evtl.SERVICE 12 x Orange 10 Other Hardware error - SERVICE None None Other Hardware error - SERVICE None None Other Hardware error - SERVICE
Canon BJC4000
Canon BJC4100
Power Error Beeper Error/Cause On On 1 Paper Pickup Error or out of paper On On 2 Paper Jam Blinks Off BJ Cartridge not detected, replace printhead, evtl. SERVICE Blinks Blinks 1 RAM Error - SERVICE Blinks Blinks 2 ROM Error - SERVICE Blinks Blinks 3 Cartridge not detected, replace printhead, evtl. SERVICE Blinks Blinks 4 Home Position Error - SERVICE Blinks Blinks 5 Waste Full - SERVICE Blinks Blinks 6 Temperature Sensor Error - SERVICE Blinks Blinks 7 Print Position - SERVICE Blinks Blinks 8-9 Head temperature or sensor error - SERVICE Blinks Blinks 10 Cleaning Error - SERVICE
Canon BJC4200
Canon BJC4300
Canon BJC4400
Canon BJC4550
Canon BJC4650
Power/Error Indicator Color Beeper Error/Cause On Orange 1 Paper Pickup Error or out of paper On Orange 2 Paper Jam On Orange 5 Cartridge Mode Mismatch, - SERVICE Blinks Green 1 Cartridge Not detected, replace printhead, evtl. SERVICE Blinks Green<>Orange 1 RAM Error - SERVICE Blinks Green<>Orange 2 ROM Error - SERVICE Blinks Green<>Orange 3 BJ Cartridge Displacement error, replace printhead, evtl. SERVICE Blinks Green<>Orange 4 Home Position Error - SERVICE Blinks Green<>Orange 5 Waste Full - SERVICE Blinks Green<>Orange 6 Temperature Sensor Error - SERVICE Blinks Green<>Orange 7 Print Position - SERVICE Blinks Green<>Orange 8-9 Head temperature or sensor error - SERVICE Blinks Green<>Orange 10 Cleaning Error - SERVICE Blinks Green<>Orange 11 Scanner Cartridge IS-22 Displacement
Canon BJC5000
Canon BJC5100
Power/Error LED Beeps Error Steady 2 Paper Feed / Delivery Steady 3 BJ Cartridge (Holder 1) not detected, replace printhead, evtl. SERVICE Steady 4 BJ Cartridge (Holder 2) not detected, replace printhead, evtl. SERVICE Blinks 5 BJ Cartridge High heat error, replace printhead, evtl. SERVICE Blinks 6 Waste Full Warning - SERVICE
Blinks 7 Service Errors Blinks Orange x7 7 Overheated Printhead / Failed Printhead replace printhead, evtl. SERVICE Blinks Orange x8 7 Overheated Printhead / Failed Printhead replace printhead, evtl. SERVICE Blinks Orange x9 7 BJ Cartridge Not Found, replace printhead, evtl. SERVICE
Canon BJC5500
Error Cause
C1 Waste Ink Warning
C5 Low Battery Warning
E1 Paper Pickup Error or out of paper
E2 Paper Delivery Jam
E3 Cannot switch between cut sheets and fanfold paper. - SERVICE
E6 Not detecting the print head, replace printhead, evtl. SERVICE
F1 Carriage motor / home position related errors - SERVICE
F3 Encoder related errors - SERVICE
F11 Internal thermistor error - SERVICE
F12 PrintHead Temperature Error, replace printhead, evtl. SERVICE
F13 Print Head Installation Error, replace printhead, evtl. SERVICE
F14 Waste Ink is Full - SERVICE
F15 Error detected when capping cartridge - SERVICE
F1a Error detected when checking the RAM - SERVICE
F1b Error detected when checking the ROM - SERVICE
F1c Error detected when checking the EEPROM - SERVICE
F1d When the head subheater fuse on printer logic board has blown, or when electrical
conductivity of the subheater is abnormal - SERVICE
F1f The optional interface was selected, but no board was installed, or an error occurred
in communication with the board - SERVICE
Online blinking replace printhead, evtl. SERVICE
Canon BJC6000
Canon BJC6100
Canon BJC6200
Indicator BEEPS Error Condition Orange 2 Out of paper, paper jam, paper feed error Orange 3 Paper Jam Orange 4 BJ Cartridge out of ink Orange 5 Cartridge not installed correctly Orange 6 Cartridge not installed Orange 7 Cartridge defective Orange 8 Waste ink tank almost full
Canon BJC6300
blink count Error Condition 2 orange Paper Feed error 3 orange Paper Jam 4 orange No Ink error 6 orange NO BJ Cartridge, replace printhead, evtl. SERVICE 7 orange BJ Cartridge error, replace printhead, evtl. SERVICE 8 orange Waste Ink warning, SERVICE 2 orange green CR error - SERVICE 3 orange green LF error - SERVICE 4 orange green Purge Sensor error - SERVICE 6 orange green abnormal internal temperature - SERVICE 7 orange green Waste ink full error - SERVICE 8 orange green abnormal Head temperature, replace printhead, evtl. SERVICE 9 orange green EEPROM error - SERVICE Orange RAM error - SERVICE Ink sensor error - SERVICE
Canon BJC6500
Canon S4500
Canon S450
Indicator BEEPS Error Condition
Orange 2 Paper Feed/Delivery
Orange 3 Paper Jam
Orange 4 Ink Out
Orange 5 BJ Cartridge Mismatch, replace printhead, evtl. SERVICE
Orange 6 NO BJ Cartridge, replace printhead, evtl. SERVICE
Orange 7 BJ Cartridge Error, replace printhead, evtl. SERVICE
Orange 8 Waste Full warning - SERVICE
Orange 9 Auto Head Adjustment Error - SERVICE
1 x Orange 10 ROM Error - SERVICE
2 x Orange 10 RAM Error - SERVICE
3 x Orange 10 EEPROM - SERVICE
4 x Orange 10 Home Position - SERVICE
5 x Orange 10 Temperature Sensor - SERVICE
6 x Orange 10 Waste Full - SERVICE
7 x Orange 10 Cartridge OverHeat, replace printhead, evtl. SERVICE
8 x Orange 10 Cartridge Overheat, replace printhead, evtl. SERVICE
9 x Orange 10 Cartridge Displaced, replace printhead, evtl. SERVICE
6x Orange 6 Nicht beschrieben! Meist ist einer der beiden Druckköpfe defekt. Oft hilft auch
ein Reset: Beide Tasten dreecken und dabei gleichzeitig Netzkabel einstecken.
Canon S450
Power Error LED PC-Meldung Error Condition 1x orange / 1x green ROM ROM Error - SERVICE 2x orange / 1x green RAM RAM Error - SERVICE 2x orange / 1x green Paper Feed Error Kein Papier, Einzugrollen defekt, Einzugsmechanik defekt 3x orange / 1x green 6800 EEPROM EEPROM Error - SERVICE 3x orange / 1x green Paper jam Error Papierstau, evtl Papierfetzen im Gerät, Sensor defekt 4x orange / 1x green 5100 Home position Home Position Error - SERVICE 4x orange / 1x green Out of Ink Error Tinte leer, Druckkopf defekt 5x orange / 1x green 5400 internal temperature sensor Internal temperature sensor error - SERVICE 5x orange / 1x green Cartridge Installation error Druckkopf defekt , nicht richtig eingebaut 6x orange / 1x green 5B00 Waste Ink full Waste Ink Full Error (Alttintenbehälter voll) 6x orange / 1x green No cartridge error Kein Druckkopf, Druckkopf defekt 7x orange / 1x green 5200 Abnormal head temperature Abnormal Head Temperature Error - replace head 7x orange / 1x green Cartridge error Druckkopf defekt
Canon BJC7000
Canon BJC7100
Power Error LED BEEPS Error Condition Steady 2 Paper Feed/Delivery Steady 3 BC-60 Out of Ink Steady 4 BC-61 or BC-62e Out of ink Steady 5 Cartridge Error - SERVICE Steady 6 Waste Full warning Steady 7 BJ Cartridge has overheated, replace printhead, evtl. SERVICE blinks 2 times 8 Home Position not detected - SERVICE Blinks 3 times 8 Home Position error - SERVICE Blinks 4 times 8 Purge Unit Error - SERVICE Blinks 5 times 8 Sheet Feeder Error - SERVICE Blinks 6 times 8 Printer temperature Sensor error - SERVICE blinks 7 times 8 Waste full error blinks 9 times 8 EEPROM error - SERVICE blinks 10 times 8 ROM error - SERVICE blinks 11 times 8 RAM error - SERVICE blinks 12 times 8 Carriage Motor error - SERVICE blinks 13 times 8 Paper Feed Motor error - SERVICE blinks 14 times 8 other hardware error - SERVICE
Canon BJC 8000
Power Error LED BEEPS Error Condition Steady 2 Paper Feed/Delivery Steady 3 BC-60 Out of Ink Steady 4 BC-61 or BC-62e Out of ink Steady 5 Cartridge Error, replace printhead, evtl. SERVICE Steady 6 Waste Full warning - SERVICE Steady 7 BJ Cartridge has overheated, replace printhead, evtl. SERVICE BLINKS 8 Service Errors
Canon BJC 8200
Indicator BEEPS Error Code Error Condition Orange 2 Paper Feed/Delivery Orange 3 Paper Jam Orange 4 Ink Out Orange 5 NO BJ Cartridge, replace printhead, evtl. SERVICE Orange 6 BJ Cartridge Misinstalled, replace printhead, evtl. SERVICE Orange 7 BJ Cartridge Error, replace printhead, evtl. SERVICE Orange 8 Waste Full warning - SERVICE 1 x Orange 10 6100 ROM Error - SERVICE 2 x Orange 10 6300 RAM Error - SERVICE 3 x Orange 10 6800 EEPROM - SERVICE 4 x Orange 10 5100 Home Position - SERVICE 5 x Orange 10 5400 Temperature Sensor - SERVICE 6 x Orange 10 5B00 Waste Full - SERVICE 7 x Orange 10 5200 Cartridge OverHeat, replace printhead, evtl. SERVICE 8 x Orange 10 5200 Cartridge Overheat replace printhead, evtl. SERVICE 9 x Orange 10 5600 Cartridge Displaced replace printhead, evtl. SERVICE 12 x Orange 10 6500 Other Hardware error, - SERVICE
Canon S900
Canon S820
Canon S750
Canon S500
Canon S520
blink count Error Condition 2 orange Paper Feed error 3 orange Paper Jam 4 orange No Ink error 5 orange Cable cover error - SERVICE 6 orange NO BJ Cartridge, replace printhead, evtl. SERVICE 7 orange BJ Cartridge error, replace printhead, evtl. SERVICE 8 orange Waste Ink warning, SERVICE 2 orange green CR error - SERVICE 3 orange green LF error - SERVICE 4 orange green Purge Sensor error - SERVICE 6 orange green abnormal internal temperature - SERVICE 7 orange green Waste ink full error - SERVICE 8 orange green abnormal Head temperature, replace printhead, evtl. SERVICE 9 orange green EEPROM error - SERVICE 10 orange green ROM error - SERVICE 11 orange green RAM error - SERVICE
Canon S300
Canon S330
blink count Error Condition 2 orange Paper out error , Papier einlegen, RESUME drücken 3 orange Paper jam error 6 orange Print Head not installed, replace printhead, evtl. SERVICE 7 orange Print head error, Druckkopf ersezten, evtl. SERVICE 8 times Waste Ink near full 2 toggles Carriage error, SERVICE 4 toggles Purge error, SERVICE 6 toggles Internal temperature rise error, SERVICE 7 toggles Waste ink full error, SERVICE 8 toggles Print head abnormal temperature, replace printhead, evtl. SERVICE 9 toggles EEPROM error, SERVICE 10 toggles EEPROM print head information error, replace printhead, evtl. SERVICE
Canon i550
Canon i850
Canon i950
blink code count am PC Error Condition 2 1000 Paper out error , Papier einlegen, RESUME drücken 3 1300 Paper jam error 4 1601, 1611, 1612, 1613, 1634, 1635 No Ink Error - Tinte leer 6 1401 No Cartridge error 7 1403, 1405, 1485 Cartridge Error 8 1700 Waste ink full warning - Alttintenbehälter tauschen 2 5100 Carriage Error - SERVICE 3 6000 LF-Error - SERVICE 4 5C00 Recovery System Error - SERVICE 6 5400 Internal temperature error - SERVICE 7 5B00 Waste Ink Full - Alttintenbehälter voll 8 5200 Head overheating error - Druckkopf defekt, evtl. SERVICE 9 6800 EEPROM Error - SERVICE 10 6100 ROM error - SERVICE 11 6300 RAM erorr - SERVICE 13 other hardware error - Druckkopf oder Hauptplatine defekt LED AN 6800 RAM error II - SERVICE
Canon i320
blink count (orange + green cyclical) Error Condition 2 Carriage Error - SERVICE 6 Internal temperature error - SERVICE 7 Waste Ink full error - Alttintenbehälter ersetzen 8 Abnormal temperature rise - SERVICE 9 EEPROM error - SERVICE 10 No Cartridge - Kein Druckkopf, Druckkopf defekt, Flachbandbakel defekt, Hauptplatine defekt
Fehler-Erklärungen Waste Ink Warning / Waste ink Full Alttintenbehälter (fast) voll - Abhilfe HIER
BJ Cartridge error/ No BJ Cartridge / BJ Cartridge misinstalled Prüfen Sie ob der Druckkopf richtig installiert ist (verriegelt, gerade?) Ersetzen Sie den Druckkopf (defekter Kopf) Prüfen Sie die Kontakte des Flachbandkabels (meist golden) das die Verbindung zwischen Kopf und Elektronik herstellt. - verschmutzt? mit lauwarmen Wasser und fusselfreiem Tuch vorsichtig reinigen - eingerissen oder anders mechanisch beschädigt? Da hilft nur ein neues Kabel Wenn das alles nichts hilft bleibt nur noch die Möglichkeit einer defekten Elektronik
abnormal Head temperature Ersetzen Sie den Druckkopf (defekter Kopf) Prüfen Sie die Kontakte des Flachbandkabels (meist golden) das die Verbindung zwischen Kopf und Elektronik herstellt. - verschmutzt? mit lauwarmen Wasser und fusselfreiem Tuch vorsichtig reinigen - eingerissen oder anders mechanisch beschädigt? Da hilft nur ein neues Kabel Wenn das alles nichts hilft bleibt nur noch die Möglichkeit einer defekten Elektronik
abnormal internal temperature Elektronik defekt
Purge error / Purge Sensor error / Cleaning error Die Purge-Unit (Reinigereinheit rechts unterhalb des Kopfes) ist defekt.
EEPROM error/ ROM error / RAM error Das entsprechende Bauteil auf der Elektronik ist defekt - manchmal funktioniert Alttintenbehälter-Reset <wasteink.htm>, da dabei auch andere Sachen zurückgesetzt werden - wenn nicht bleibt nur eine neue Elektronik
Home Position error Heimpositionssensor ist verschmutzt oder defekt (meistens eine Lichtschranke am Metallrahmen hinter dem Druckkopf, meistens im rechten Teil des Druckers gelegen) manchmal auch defekte Elektronik..
Encoder-Error (Codierer-Fehler) nur BJC600-Serie: hinter dem Druckkopf zieht von links nach rechts eine Dünne Metallstange durch den Drucker. Diese hat magnetische Markierungen durch die die exakte Position des Kopfes festgestellt wird. Diese Markierungen sind nicht mehr erkennbar für die Elektronik (meistens durch starkes Magnetfeld in der Nähe - Schraubenzieher, Monitor, Lautsprecher etc.) - manchmal hilft es noch das Magnetfeld zu entfernen, sonst bleibt nur der Austausch dieses Encoders.
Paper Feed error, Carriage Error Papier-Transport-Problem Einzugrollen prüfen: drehen sich Rollen? nein? Motor defekt? Zahnrad im Antrieb defekt oder blockiert Einzugrollen überprüfen: wird Papier überhaupt gegriffen? nein? Neue Einzugrollen einbauen <e-teile.htm>. Wie weit wird Papier eingezogen? Diese Stelle ansehen - blockiert? Büroklammer oder ähnliches reingefallen? Wird ununterbrochen Papier eingezogen und ausgeworfen? Purge Unit (Reinigungseinheit für Druckkopf) defekt. - Diese steuert über einen kleinen Hebel bei den meisten Druckern auch den Start des Papiereinzugs. sonst möglicherweise Elektronik defekt
xxx Motor error der betreffende Motor ist defekt oder Elektronik ist defekt
Ink out Tinte ist leer oder wenn nicht: Purge Unit (Reinigereinheit) defekt oder Elektronik ist defekt
Recovery System Error Purge Unit defekt Hauptplatine defekt
